News Center
Shandong Zhensure New Materials Technology Industry Co., Ltd.
I. Daily Cleaning: Three simple steps for easy maintenance
Remove surface debris
Use a soft-bristled broom or vacuum cleaner to regularly clean up dust, fallen leaves, etc., and avoid scratching with hard objects.
Gentle cleaning to avoid damage
For daily stains (such as footprints, dust), wipe with clean water or a neutral detergent (such as a diluted dishwashing liquid) and a soft cloth.
⚠️ Avoid: strong acid/alkali cleaners, bleach, hard tools such as steel wool balls.
Stubborn stain treatment: Oil stains, ink marks, etc. can be treated locally with a small amount of alcohol or a special wood-plastic cleaner, then rinsed with clean water and dried.Wood-plastic clean.png
Second, deep maintenance: Scientific protection to extend lifespan
Regular inspection and tightening
Check whether the connection points are loose every quarter, and reinforce the screws or clips in time to prevent deformation.
Sun protection and drainage maintenance
Install sunshades or choose light-colored products to reduce the impact of intense sun exposure. Make sure to leave a 5-10mm expansion joint during installation
to prevent water accumulation and expansion.
Anti-mold and anti-bacterial treatment
Damp environments are prone to mold growth. You can wipe with diluted bleach (in a ratio of 1:10) or use a dedicated anti-mold spray.
Iii. Common Problems and Solutions
Scratch repair: For minor scratches, gently sand with fine sandpaper (180-240 mesh) and then apply repair wax. Severe damage requires contact with a professional
service provider to replace the board.
Fading treatment: Choosing products with UV protective coatings can reduce the risk of fading. If it has faded, it can be solved by local painting or replacing the board.
Expansion deformation: Reserve expansion joints during installation to avoid thermal expansion and contraction compression. If it has occurred,
some of the plates need to be removed and the gap readjusted.
Iv. Why Choose Professional Wood-Plastic Cleaning and Maintenance?
Extending lifespan: Scientific maintenance can extend the service life of wood-plastic composites by more than 10 years, saving replacement costs.
Maintain beauty: Regularly clean to prevent stains from penetrating and keep the natural texture and color for a long time.
Environmental upgrade: Reduce the use of chemical cleaners, in line with the environmental protection concept of wood-plastic.
The charm of wood-plastic materials lies in their environmental friendliness and durability, and more importantly,
in the fact that through scientific cleaning and maintenance, every detail can radiate lasting vitality.
Whether it's a courtyard leisure area, a balcony view or a commercial space,
choosing wood-plastic means choosing a lifestyle that requires low maintenance and offers high enjoyment.I. Daily Cleaning: Three simple steps for easy maintenance
Remove surface debris
Use a soft-bristled broom or vacuum cleaner to regularly clean up dust, fallen leaves, etc., and avoid scratching with hard objects.
Gentle cleaning to avoid damage
For daily stains (such as footprints, dust), wipe with clean water or a neutral detergent (such as a diluted dishwashing liquid) and a soft cloth.
⚠️ Avoid: strong acid/alkali cleaners, bleach, hard tools such as steel wool balls.
Stubborn stain treatment: Oil stains, ink marks, etc. can be treated locally with a small amount of alcohol or a special wood-plastic cleaner, then rinsed with clean water and dried.
Second, deep maintenance: Scientific protection to extend lifespan
Regular inspection and tightening
Check whether the connection points are loose every quarter, and reinforce the screws or clips in time to prevent deformation.
Sun protection and drainage maintenance
Install sunshades or choose light-colored products to reduce the impact of intense sun exposure.
Make sure to leave a 5-10mm expansion joint during installation to prevent water accumulation and expansion.
Anti-mold and anti-bacterial treatment
Damp environments are prone to mold growth. You can wipe with diluted bleach (in a ratio of 1:10) or use a dedicated anti-mold spray.
Iii. Common Problems and Solutions
Scratch repair: For minor scratches, gently sand with fine sandpaper (180-240 mesh) and then apply repair wax.
Severe damage requires contact with a professional service provider to replace the board.
Fading treatment: Choosing products with UV protective coatings can reduce the risk of fading. If it has faded,
it can be solved by local painting or replacing the board.
Expansion deformation: Reserve expansion joints during installation to avoid thermal expansion and contraction compression.
If it has occurred, some of the plates need to be removed and the gap readjusted.
Iv. Why Choose Professional Wood-Plastic Cleaning and Maintenance?
Extending lifespan: Scientific maintenance can extend the service life of wood-plastic composites by more than 10 years, saving replacement costs.
Maintain beauty: Regularly clean to prevent stains from penetrating and keep the natural texture and color for a long time.
Environmental upgrade: Reduce the use of chemical cleaners, in line with the environmental protection concept of wood-plastic.
The charm of wood-plastic materials lies in their environmental friendliness and durability, and more importantly,
in the fact that through scientific cleaning and maintenance, every detail can radiate lasting vitality.
Whether it's a courtyard leisure area, a balcony view or a commercial space,
choosing wood-plastic means choosing a lifestyle that requires low maintenance and offers high enjoyment.
This article will provide you with a detailed introduction to the core advantages of wood-plastic products from three aspects: environmental performance, durability and maintenance, and application fields.
It is highly cost-effective and has a wide range of application scenarios. From commercial Spaces to home decoration and even special environments, it can be perfectly integrated, becoming an innovative solution for the fusion of modern architecture and urban ecology.
It overcomes the shortcomings of traditional plant walls, such as cumbersome maintenance and limited environmental conditions. With advantages like zero maintenance, high weather resistance, and full-scenario adaptability, it has become an ideal decoration solution for commercial Spaces, home designs, and special environments, redefining the way humans interact with nature.
1. Environmentally friendly and durable, with an extremely long service life 2. Quick installation, saving time and effort 3. Zero maintenance cost, saving you both time and money 4. Safe and anti-slip, suitable for multiple scenarios
Wood-plastic Composite (WPC) is an innovative material that combines natural Wood fibers with thermoplastic plastics, featuring both the warm texture of wood and the durability of Plastic. With the enhancement of environmental awareness, the application of wood-plastic composites in the fields of construction and home furnishing is becoming increasingly widespread. Its waterproof, moisture-proof and moth-proof properties make it an ideal choice for outdoor flooring, fences, flower boxes and other scenarios. The rich colors and textures also make wood-plastic products shine brightly in indoor furniture and wall decoration. This article will take you into the diverse application scenarios of wood-plastic composites and explore how they infuse different Spaces with dual values of nature and practicality.